The pistol mount on this firearm folds sideways for significant length reduction and features a floating M-LOK front end on the 5.5″ stainless steel barrel with a triple-ear flash suppressor. This pistol is made from tough alloy with lightweight cutouts to reduce weight and uses the M-LOK attachment system. The SIG MCX Rattler Advanced Sharp Trigger features a polished, sharpened lever and hard anodized finish for durability. Sig Sauer MCX Rattler pistols are built from the ground up. Join the familiar AR-15 as a compact .300 Blackout weapon system.
The SIG SAUER MCX VIRTUS pistol, designed for the needs of the special operations technician, is designed with adaptability, noise reduction and durability in mind. Rattler does not offer barrel interchangeability typical of other MCX variants. Any AR style pistol grip can be fitted, but the model supplied with the SIG MCX Canebrake is specially tailored to be easily hidden under a jacket or coat.
This bracket was made specifically for the MCX / MPX series and has the unique ability to rotate, so the shooter can see the scope without having to hold the weapon horizontally. Since this is a pistol, SIG has included a side-folding pivoting contour bracket (PCB) at the rear of the top of the receiver. This model comes with a pivoting contour holder (PCB) that can be folded sideways to fit into an extremely compact backpack and fully extend when needed in seconds.
It has a 292mm (11.5 “) barrel for 5.56x45mm NATO and a 140mm (5.5”) barrel and 229mm (9 “) barrel for the .300 AAC Blackout. The SIG MCX RATTLER is a variant of the short-barreled shotgun for use as a personal protective weapon, equipped with a barrel length of 140 mm (5.5 inches) and equipped with a Picatinny tail connector for attaching a compact stock or folding PCB (contour strut). …
The SIG MCX pistol is a rifle pistol configuration with a 229 mm (9 in) or 292 mm (11.5 in) barrel and comes with SIG Sauer SBX (pistol stabilizer bar) or SIG Sauer PCB (pistol revolving contour fold). braces). The MCX is available in shotgun, carbine, short-barreled shotgun and pistol configurations (the latter configuration usually meets the definition of a compact carbine, but with a pistol clip rather than a stock). This pistol has been designed from the ground up to be as inconspicuous as possible while still retaining all the reliable capabilities of the MCX. This short PDW steel barrel comes with a muzzle mounted to suppress the flash.
Floating M-LOK forend combined with a PDW upper and barrel, the MCX Rattler PCB is the perfect choice for the MCX Rattler Canebrake comes as a silencer-ready platform with an SD forend and an inert training device that simulates the size and weight of the SIGRD762 and ensures that the entire the muzzle flash will not fall into the shooter’s hands when it reaches the forend during operation without a functional silencer installed. Other features of the MCX Rattler Canebrake include a two-stage flat-blade trigger, Cerakote E190 trim on the top and bottom, and a coyote-colored folding pivot bracket. Available in elegant Coyote Tan and Black colors and chambered in .300 Blackout, the Canebrake never fails to amaze you wherever you use it. The Canebrake Rattler comes with a factory-installed inert teaching device, allowing it to be used instantly while NFA documents and waiting periods are over, and thus easily converted to a suppressed launch.
All you need is a suppressor! Each SIG Sauer MCX Rattler Canebrake features a gas piston operating system and features a company’s SD forend that’s large enough to wrap around an attached muffler, protecting the shooter’s hand and providing a compact, easy-to-maneuver platform. 300 BLK. We tried the fantastic SIG Sauer MCX Rattler Canebrake .300 Blackout pistol with an innovative swivel (and foldable) mount. I also loved my P229, and of the shotguns one of my recent favorites was the SIG SAUER MCX Virtus short stroke piston with folding stock. In fact, he was so popular that I had to go back “seconds” with a pistol.
Shooting from the booth for fun resulted in constant gong bangs from 3 MOA to 200 yards and even up to 300 – an exciting thing as the Rattler PCB was not designed for accurate shooting at any level. The Rattler is built to hit, bite and retreat for the next round.
What’s more, the Rattlers’ impressive distance and controlled bite are venomous enough to turn you into a compact SIG fanatic. Also features a two-stage flat-blade trigger and a foldable pivot profile PCB holder, the Rattlers are customizable and maneuverable for maximum comfort.
Features a 5-inch barrel with excellent bore, 1/5 RPM and gas piston control system. Equipped with a 5.5-inch PDW barrel, the MCX platform has never been more compact and affordable.
Designed for those looking to use the MCX as a suppression system without the need to purchase add-ons. If you’ve ever wanted a muffled MCX, then this version will be your choice for a while. It also uses AR-15 style magazines, be it Mil-Spec aluminum or PMAG polymer.
Floating forend M-Lok; Side folding pivot contour bail 2 days ago * Black Sig Sauer MCX Rattler forend and FDE black Sig Sauer MCX Rattler Canebrake forend. Yes, Rattler: 300 Blackout variant with 5.5-inch barrel and side-folding stock.
The Rattler PCB short stroke piston seems to follow Virtus’ lead to some extent and certainly retains the reliability, capabilities and best performance of the MCX; however, at just 29.25 inches long and folding to a much more compact length considering the pivoting contour bracket (hence the PCB) my Rattler test and evaluation PCB chambered for the .300 (AAC) Blackout is different and awesome kind of beast. generally. LittleLight suggested replacing the matched materials with my new parts so that all of the existing floating M-LOK Handguard material can be matched with the PDW upper and PDW ultra-thin folding aluminum stock. The MCX Rattler SBR is the perfect choice for fast-moving operators. This replaces the NFA regulated silencer and ensures users can safely fire their weapons while waiting for the NFA papers to be cleared for their next can.
In the event that the firearms have been shipped to a state where firearms are illegal, the customer will be charged a 15% restocking fee. Return shipping restrictions are the same as for original shipping. Weapons, ammunition, licenses, swimwear, underwear, special orders and salvaged items are non-refundable.
Once the firearm is received from our store, we will process the return. Please note that you must contact Perrys within 3 days of receiving the firearm in order to obtain a return authorization. Perrys will gladly refund the purchase price of any firearm excluding shipping charges.